SONY introduced their own small-format 90.0 × 94.0 mm disk, similar to the others but somewhat simpler in construction than the AmDisk. The first computer to use this format was the HP-150 of 1983, and Sony also used them fairly widely on their line of MSX computers. Other than this the format suffered from a similar fate as the other new formats; the 5¼-inch format simply had too much market share. Things changed dramatically in 1984 when Apple Computer selected the format for their new Macintosh computers. By 1988 the 3½-inch was outselling the 5¼-inch. The 3½-inch disks had, by way of their rigid case's slide-in-place metal cover, the significant advantage of being much better protected against unintended physical contact with the disk surface than 5¼-inch disks when the disk was handled outside the disk drive. When the disk was inserted, a part inside the drive moved the metal cover aside, giving the drive's read/write heads the necessary access to the magnetic recording surfaces. Adding the slide mechanism resulted in a slight departure from the previous square outline. The irregular, rectangular shape had the additional merit that it made it impossible to insert the disk sideways by mistake as had indeed been possible with earlier formats. The shutter mechanism was not without its problems, however. On old or roughly treated disks the shutter could bend away from the disk. This made it vulnerable to being ripped off completely (which does not damage the disk itself but does leave it much more vulnerable to dust), or worse, catching inside a drive and possibly either getting stuck inside or damaging the drive. On disks with the cover bending away the best option is to rip the cover off (to make sure it does not catch in the drive) and then immediately copy the data off it. Most modern floppies have a springy plastic cover that does not tend to bend away from the disk. Like the 5¼-inch, the 3½-inch disk underwent an evolution of its own. When Apple introduced the Macintosh in 1984, it used single-sided 3½-inch disk drives with an advertised capacity of 400 kB. The encoding technique used by these drives was known as GCR, or Group Code Recording. Somewhat later, PC-compatible machines began using single-sided 3½-inch disks with an advertised capacity of 360 kB (the same as a single-sided 5¼-inch disk), and a different, incompatible recording format called MFM (Modified Frequency Modulation). GCR and MFM drives (and their formatted disks) were incompatible, although the physical disks were the same. In 1986, Apple introduced double-sided, 800 kB disks, still using GCR, and around the same time, 720 kB double-sided double-density MFM disks began to appear on PC-compatibles. A newer "high-density" format, displayed as "HD" on the disks themselves and storing 1440 kB of data, was introduced in 1987. These HD disks had an extra hole in the case on the opposite side of the write-protect notch. IBM used this format on their PS/2 series introduced in 1987. Apple started using "HD" in 1988, on the Macintosh IIx, and the HD floppy drive soon became universal on virtually all Macintosh and PC hardware. Apple's HD drive was capable of reading and writing both GCR and MFM formatted disks, and thus made it relatively easy to exchange files with PC users. Apple marketed this drive as the "SuperDrive." Interestingly, Apple began using the SuperDrive brand name again around 2003 to denote their all-formats CD/DVD reader/writer. Another advance in the oxide coatings allowed for a new "extended-density" ("ED") format at 2880 kB introduced on the second generation NeXT Computers in 1991, and on IBM PS/2 model 57 also in 1991, but by the time it was available it was already too small in capacity to be a useful advance over the HD format and never became widely used. The 3½-inch drives sold more than a decade later still use the same 1.44 MB HD format that was standardized in 1989, in ISO 9529-1,2. [edit] Reported 3.5" DSHD FDD storage capacity The unformatted capacity of 3½-inch double sided high density floppy disk is 2.0 megabytes; in its most common format it has a capacity of 1,474,560 bytes or 1.47 MB (simply dividing by 1,000,000). In the binary prefix numbering system this is 1.41 MiB. Neither of these numbers is generally used; number most frequently printed on these floppies is 1.44 MB. This value was apparently reached by doubling (in the decimal system) the capacity of the prior generation 720 "KB" [actually KiB] double sided double density floppy disk and dividing by 1,000, to arrive at 1.44 kiloKibi bytes and mis-labeling such as "MB". A person expecting the 1.44 "MB" number to be either binary prefix or decimal would always miscalculate the number of floppies needed.
No comments:
Post a Comment